realtime:documentation:howto:tools:cyclictest:start
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
realtime:documentation:howto:tools:cyclictest:start [2024/10/04 06:56] costa.shul clock_nanosleep |
realtime:documentation:howto:tools:cyclictest:start [2025/01/19 17:42] (current) costa.shul remove link to empty result-examples |
||
|---|---|---|---|
| Line 78: | Line 78: | ||
| It can also be interesting to compare with results from other systems that were running loads, using various Cyclictest parameters, and running different real-time and non real-time kernels. These results give a general idea of the order of magnitude that the latencies should be. They also show the effect that different test conditions and parameters can have on the Cyclictest results. | It can also be interesting to compare with results from other systems that were running loads, using various Cyclictest parameters, and running different real-time and non real-time kernels. These results give a general idea of the order of magnitude that the latencies should be. They also show the effect that different test conditions and parameters can have on the Cyclictest results. | ||
| - | |||
| - | <WRAP rightalign>[[realtime:documentation:howto:tools:cyclictest:result-examples|Read detailed examples of results]]</WRAP> | ||
| ===== Test Design ===== | ===== Test Design ===== | ||
realtime/documentation/howto/tools/cyclictest/start.1728025011.txt.gz ยท Last modified: 2024/10/04 06:56 by costa.shul
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
